Electrical Panel Upgrade in Garland, TX

Licensed master electrician. City permits, Garland Power & Light or Oncor coordination, and final inspection handled start to finish by Kravolt Electric.

State-Licensed Master Electrician · TECL #40613

If your breaker box is sparking, buzzing, hot to the touch, or smells like burning plastic

Stay clear of it and call 911 first. If it is safe to do so, switch the main breaker off. Then call our emergency line at (214) 222-0320.

Garland's Local Electrician for Panel Replacement

Your electrical panel controls every circuit in your home, and when it is outdated, overloaded, or damaged, everything it feeds is at risk. If you are searching for an electrical panel upgrade in Garland, TX, Kravolt Electric gives you a clear diagnosis, a written quote, and a licensed master electrician involved from the first inspection through the city’s final approval.

We upgrade 100-amp and 125-amp services to 200 amps, replace fuse boxes and worn breaker panels, and remove hazardous legacy brands. Whether you are adding central air, setting up a home office, or planning an EV charger, we make sure your home’s electrical service is ready for the load.

Garland Has Two Electric Utilities. Do You Know Which One Serves You?

Most Garland homes get their electricity from Garland Power & Light, the city’s own utility. Some addresses are served by Oncor instead. [Confirm with GPL; do not publish percentages.] You can’t always tell by looking at your bill or your zip code, because zip codes in Garland can be split between the two.

It matters for a panel upgrade because the utility sets requirements for the meter equipment, service attachment, and clearances, and it handles the disconnect and reconnect of your service. Quoting the wrong equipment, or contacting the wrong utility, can delay your project by days.

Here’s how we handle it. During your free inspection we confirm which utility serves your address, quote the equipment that utility requires, and coordinate the disconnect and reconnect with them. You don’t have to learn the difference.

Want to check yourself? Look at your electric bill. If it comes from the City of Garland, you’re a GPL customer. If it comes from a retail electricity provider you chose, you’re probably in Oncor territory. [Confirm this guidance with GPL before publishing.] Or call us at (214) 222-0320 and we’ll help you figure it out.

GPL or Oncor? What Changes for Your Panel Upgrade

Garland Power & LightOncor
Who runs itThe City of GarlandA regulated delivery company
How you buy powerDirectly from the cityFrom a retail electricity provider you choose
Disconnect and reconnectHandled by GPL [confirm process]Handled by Oncor [confirm process]
Meter and service equipmentGPL requirements [confirm]Oncor requirements [confirm]
Who we coordinate withGPLOncor
Same city, same permit office, two different utilities. We handle both.

Signs Your Garland Home Needs a Panel Upgrade

Panels usually warn you before they fail. Call us if you notice any of these:

Why Older Garland Homes Outgrow Their Electrical Service

Garland has been growing for generations, and established areas around Downtown Garland, Spring Park, Duck Creek, and Centerville Road include many homes originally wired for a fraction of today’s demand. Many of those homes still run on 100-amp service or older fuse boxes.

Now think about how a household uses power today. Central air runs through long Texas summers. Kitchens hold high-draw appliances. Home offices, gaming setups, and EV chargers all run at once. When a panel is asked to carry more than it was designed for, breakers run hot, connections loosen, and the risk of failure rises. An upgraded panel gives your home the capacity it needs now, with room for what comes next.

Problems We Correct in Garland Homes

Undersized service

Older 100-amp services struggle with modern loads and can block the addition of new A/C or EV charging equipment.

Fuse boxes and 60-amp services

Legacy fuse blocks and small main services are replaced with a modern panel and a single main disconnect.

Split-bus panels

Panels without a single main shutoff make it harder to cut power in an emergency and often can’t accept modern protection devices.

Weather wear at the weatherhead and riser

Storms, wind, and moisture take their toll on exterior service equipment. We replace damaged meter sockets, risers, and weatherheads as part of the project.

Hazardous legacy brands

FPE Stab-Lok and Zinsco panels have documented histories of breakers that fail to trip during overloads. We recommend replacing them rather than repairing them.

How Our Panel Replacement Process Works

Replacing a main panel involves your city and your utility, not just an electrician. We manage every step.
  1. Free in-home inspection and quote. We evaluate your panel, meter base, service entrance, and grounding, then give you a written quote with no surprises.
  2. City of Garland permit. We pull the electrical permit through the Building Inspection Department before work begins.
  3. Utility coordination. We arrange the temporary disconnect and reconnect with GPL or Oncor, whichever serves your address.
  4. Installation. Your master electrician and crew remove the old panel, install the new one with a main disconnect and correctly rated breakers, label every circuit, and update grounding as required.
  5. City inspection. We schedule and attend the final inspection. After the work passes, the utility restores your power.
  6. Walkthrough. We show you your new panel, explain the circuit labels, and answer your questions.

Code Compliance You Can Count On

Our installations follow the National Electrical Code edition currently adopted in Texas, along with City of Garland amendments. That means proper breaker types, arc-fault (AFCI) and ground-fault (GFCI) protection where required, surge protection where required, correct grounding and bonding, and complete circuit labeling. It also means your job is permitted and inspected, which protects your safety, your insurance coverage, and your home’s resale value.

200 Amp Panel Upgrade in Garland: What It Costs

Most Garland homeowners want the price first. A typical 200 amp panel upgrade in Garland runs $2,500 to $4,500 or more. To see what factors drive those costs up or down, check out our comprehensive breaker box replacement pricing guide. The final number depends on:

A standard quote from us includes the panel and main disconnect, breakers, permit fees, utility coordination, installation, and inspection. If your meter socket or weatherhead needs replacing, it’s listed in the written quote before work starts, not added afterward.

Flexible financing is available so you can fix a safety issue now instead of putting it off.

Breaker Box Replacement in Garland: Replace or Repair?

Sometimes a single breaker can be swapped and the panel stays. But if your box is a hazardous brand, shows heat damage, is crowded with doubled-up breakers, or can’t support the loads you need, breaker box replacement in Garland, TX is the safer and often more economical choice. We’ll tell you honestly which one applies to your home, and we’ll show you photos of what we found before you spend anything.

Garland Projects We've Completed

Garland: Completed 200-amp Square D electrical panel upgrade replacing an FPE Stab-Lok panel

Completed 200-amp Square D electrical panel upgrade replacing an FPE Stab-Lok panel in Garland, TX

Garland: exterior service panel, meter base, and conduit work

Before and after exterior brick electrical panel and meter socket upgrade in Garland, TX

Garland Neighborhoods We Serve

We’ve upgraded panels in Downtown Garland, Spring Park, Duck Creek, and areas along Centerville Road. If your area isn’t listed, call us. We probably serve it.

Why Garland Homeowners Choose Kravolt Electric

Frequently Asked Questions

Yes. Replacing a main panel or upgrading service capacity requires an electrical permit and an inspection from the City of Garland. Kravolt Electric handles the permit submittal and inspection scheduling. [Confirm with Garland Building Inspection and link the permit page.]

Check your electric bill. A bill from the City of Garland means GPL. A bill from a retail electricity provider you chose usually means Oncor. Zip codes can be split between the two, so don’t rely on zip code alone. We confirm your utility during the free inspection. [Confirm with GPL.]

It can. Each utility has its own requirements for meter sockets, service attachment, and clearances, and that equipment is part of the quote. We price what your utility requires, not a generic job. [Confirm; don’t promise price differences you haven’t seen.]

Your utility does, which is GPL or Oncor depending on your address. We coordinate the request. Reconnection follows a passed city inspection, so exact timing depends on the utility and the inspection schedule. [Confirm the process with GPL and with Garland Building Inspection.]

Most panel upgrades are completed in a single day. The utility disconnects and reconnects the service, and reconnection follows a passed city inspection, so exact times depend on their schedule. We coordinate both and keep you informed throughout.

In most cases, yes. We evaluate your existing overhead service during the inspection. If the line and equipment can support 200 amps, we replace the meter socket and weatherhead as needed. If the line needs upgrading, we’ll explain what that involves with your utility.

Both brands have documented histories of breakers that fail to trip when overloaded, which can lead to overheating. Many insurers and home inspectors flag them. We recommend replacement and can inspect yours for free.

Often, yes. A 200-amp service gives you capacity for a Level 2 EV charger, a modern HVAC system, and future additions. We run a load calculation to confirm what your home actually needs.

Yes. It’s worth having the panel inspected, especially if it’s a fuse box, a split-bus panel, or an FPE or Zinsco brand. We’ll tell you plainly what we find and quote any work in writing.

Ready to Upgrade Your Panel?

Don’t wait for a warning sign to become an emergency. Schedule your free in-home inspection for an electrical panel upgrade in Garland, TX with Kravolt Electric today.

State-Licensed Master Electrician, TECL #40613

Scroll to Top